- Product Details
Astell&Kern collaborates with Jerry Harvey Audio for the Siren Series Universal fit IEMs. This series of IEMs were designed to be used as a mastering reference tool because the high drivers are designed for optimum top end extension with minimal distortion, the mid drivers are perfectly flat from 10Hz - 5kHz, and low drivers are designed for steeper low pass and with virtually no distortion.
Fifth in the line-up is the Michelle, applied is Jerry Harvey Audio's patented "Freqphase" technology, which uses precisely cut tube lengths for each driver to minimise the phase shift of each frequency. This allows the High, Mid, and Low drivers to be aligned to 1/100ms for the most ideal phase curve. It ensures the correct time alignment and phase of all drivers resulting the most accurate music reproduction in the industry. Michelle's balanced armature driver boasts a much smaller size and amazing efficiency compared to conventional dynamic drivers. Enjoy the full range of sonic details, thanks to the sophisticated 3 balanced armature driver design.
The cable used in the Michelle is not common copper. Instead, it is a copper cable plated with silver. The cable is manufactured by first compressing the silver plated copper wire, which is then flattened and rolled into a steady interval that is then used to wrap around the Kevlar. This newly developed cable has astounding tensile strength and delivers the full dynamic range of music. Conventional straight cables do not handle the frequent bending of cables and often short out. The intertwined cable disperses the stress to the cable and offers better resilience. It's also easier to wear around the outer ears as the cable shape can be easily adjusted for the best fit.
A proper 'seal' is essential for the performance of any universal IEM. The design of the Michelle represents an exhaustive research and development project on the ergonomics of an IEM fit. The new state of the art 3D printed shell gives 'Michelle' an advanced fit that represents a significant breakthrough on IEM shell shape and the angle of the nozzle, resulting in unprecedented comfort and acoustic seal.
Drivers 3 Balanced Armature drivers Crossover 3-way crossover Impedance 18 ohms Noise Attenuation -26dB Connector Detachable custom 2-pin connector Terminator Unbalanced (3.5mm) | Balanced (2.5mm) Wearing Style In-ear Sound Technology Freqphase™ Time | Phase Waveguide
Write Your Own Review